F O R M I N G

Return Home
TOOLING HOLES - In many instances Photo Chemical Machining provides a practical method of manufacturing formed metal parts. Tooling holes can be located very accurately in relationship to the part for secondary forming.

HAND FORMING - Bend lines as shown in Fig. 4 can be etched into one side of a part. This allows the easy hand forming of sharp bends. Naturally there is a loss of structural integrity.

Fig. 4 Hand forming with bend lines









HOME | ADVANTAGES | APPLICATIONS | PROCESS | TOLERANCES | FORMING | GALLERY | CONTACT US


VAGA INDUSTRIES    2505 LOMA AVENUE, SOUTH EL MONTE, CA 91733    PH: (626) 442-7436    FAX: (626) 442-4330    EMAIL: VAGA@VAGA.COM